Albert Einstein (1879–1955). Relativity: The Special and General Theory. 1920.

ON the basis of the physical interpretation of
distance which has been indicated, we are also in a position to establish
the distance between two points on a rigid body by means of measurements.
For this purpose we require a “distance” (rod S) which
is to be used once and for all, and which we employ as a standard measure.
If, now, A and B are two points on a rigid body, we can construct
the line joining them according to the rules of geometry; then, starting
from A, we can mark off the distance S time after time until
we reach B. The number of these operations required is the numerical
measure of the distance AB. This is the basis of all measurement
of length. 1 |
1 |

Every description of the scene of an event or of the position of an object in space is based on the specification of the point on a rigid body (body of reference) with which that event or object coincides. This applies not only to scientific description, but also to everyday life. If I analyse the place specification “Trafalgar Square, London,” 2 I arrive at the following result. The earth is the rigid body to which the specification of place refers; “Trafalgar Square, London” is a well-defined point, to which a name has been assigned, and with which the event coincides in space. 3 | 2 |

This primitive method of place specification deals only with places on the surface of rigid bodies, and is dependent on the existence of points on this surface which are distinguishable from each other. But we can free ourselves from both of these limitations without altering the nature of our specification of position. If, for instance, a cloud is hovering over Trafalgar Square, then we can determine its position relative to the surface of the earth by erecting a pole perpendicularly on the Square, so that it reaches the cloud. The length of the pole measured with the standard measuring-rod, combined with the specification of the position of the foot of the pole, supplies us with a complete place specification. On the basis of this illustration, we are able to see the manner in which a refinement of the conception of position has been developed. | 3 |

(a) We imagine the rigid body, to which the place specification is referred, supplemented in such a manner that the object whose position we require is reached by the completed rigid body. | 4 |

(b) In locating the position of the object, we make use of a number (here the length of the pole measured with the measuring-rod) instead of designated points of reference. | 5 |

(c) We speak of the height of the cloud even when the pole which reaches the cloud has not been erected. By means of optical observations of the cloud from different positions on the ground, and taking into account the properties of the propagation of light, we determine the length of the pole we should have required in order to reach the cloud. | 6 |

From this consideration we see that it will be advantageous if, in the description of position, it should be possible by means of numerical measures to make ourselves independent of the existence of marked positions (possessing names) on the rigid body of reference. In the physics of measurement this is attained by the application of the Cartesian system of co-ordinates. | 7 |

This consists of three plane surfaces perpendicular to each other and rigidly attached to a rigid body. Referred to a system of co-ordinates, the scene of any event will be determined (for the main part) by the specification of the lengths of the three perpendiculars or co-ordinates (x, y, z) which can be dropped from the scene of the event to those three plane surfaces. The lengths of these three perpendiculars can be determined by a series of manipulations with rigid measuring-rods performed according to the rules and methods laid down by Euclidean geometry. | 8 |

In practice, the rigid surfaces which constitute the system of co-ordinates are generally not available; furthermore, the magnitudes of the co-ordinates are not actually determined by constructions with rigid rods, but by indirect means. If the results of physics and astronomy are to maintain their clearness, the physical meaning of specifications of position must always be sought in accordance with the above considerations. 4 | 9 |

We thus obtain the following result: Every description of events in space involves the use of a rigid body to which such events have to be referred. The resulting relationship takes for granted that the laws of Euclidean geometry hold for “distances,” the “distance” being represented physically by means of the convention of two marks on a rigid body. | 10 |

Note 1.
Here we have assumed that there is nothing left over, i.e. that the
measurement gives a whole number. This difficulty is got over by the use
of divided measuring-rods, the introduction of which does not demand any
fundamentally new method.
[back] |

Note 2.
I have chosen this as being more familiar to the English reader than the
“Potsdamer Platz, Berlin,” which is referred to in the original.
(R. W. L.)
[back] |

Note 3.
It is not necessary here to investigate further the significance of the
expression “coincidence in space.” This conception is sufficiently
obvious to ensure that differences of opinion are scarcely likely to arise
as to its applicability in practice.
[back] |

Note 4.
A refinement and modification of these views does not become necessary until
we come to deal with the general theory of relativity, treated in the second
part of this book.
[back] |